| *** tpb has joined #timvideos | 00:00 | |
| mithro | sam_: Make sure you are using putty with \n line endings | 00:01 |
|---|---|---|
| mithro | sam_: Also, I highly recommend upgrading to the latest firmware | 00:01 |
| sam_ | I have checked both options "CR in every LF and LF in every CR" | 00:01 |
| mithro | sam_: I don't know putty at all, but that doesn't seem right | 00:02 |
| mithro | sam_: We primarily use flterm for development and in production | 00:02 |
| mithro | sam_: https://github.com/timvideos/flterm | 00:03 |
| tpb | Title: GitHub - timvideos/flterm (at github.com) | 00:03 |
| sam_ | it is quite odd | 00:03 |
| mithro | sam_: The older firmware only sends '\n' | 00:03 |
| sam_ | here is the output i get when pressing enter a bunch of times and then typing status and enter: | 00:03 |
| sam_ | DIUB HM2S> DIUB HM2S> DIUB HM2S> DIUB HM2S> DIUB HM2S>tts nu0 18x2 ipt: x otu0 20706H rmpten upt:18x2@0zfo atr ecdr 2070@0p 0bs rmpten(:5) d:ra:16Mp wie 84bs l:24Mp HM2S> | 00:03 |
| mithro | sam_: As well, if you have the serial port open twice it will only get half the characters on each side | 00:03 |
| sam_ | its like its missing characters | 00:03 |
| mithro | sam_: Oh that is definitely looks like having the serial port open twice | 00:03 |
| sam_ | certainly just one copy of putty running | 00:04 |
| sam_ | i will try flterm | 00:04 |
| mithro | sam_: What OS are you running? | 00:04 |
| sam_ | i have tried in both windows and ubuntu | 00:05 |
| sam_ | both result in similar results | 00:05 |
| mithro | sam_: On Linux, if you don't install the udev rules we have - modem manager will frequently open the serial port | 00:05 |
| mithro | sam_: But it is very strange that you get getting it on both Windows and Linux | 00:06 |
| mithro | sam_: It's such a long time since I've used the shipping Opsis firmware, I'm not certain that 115200 is the right speed | 00:07 |
| CarlFK | sam_: on my ubuntu bos: cat ~/.minirc.dfl | 00:08 |
| CarlFK | pu port /dev/ttyACM0 | 00:08 |
| CarlFK | pu addcarreturn Yes | 00:08 |
| sam_ | The fact that most of the characters appearing in the terminal good says to me it is 115200 | 00:08 |
| mithro | sam_: If it was any other speed it would be 9600 | 00:08 |
| sam_ | the documentation also says this baud | 00:08 |
| CarlFK | that makes mincom work well. but likely also I have disabled / removed modem manager | 00:08 |
| sam_ | I will attempt it | 00:08 |
| sam_ | nothing at all at 9600 | 00:09 |
| mithro | sam_: Yeah - that sounds correct | 00:10 |
| CarlFK | sam_: are you familiar with ansible? you 'might' want to use this to build a machine that has exactly what I have: https://github.com/CarlFK/video-stack-deploy | 00:10 |
| tpb | Title: GitHub - CarlFK/video-stack-deploy (at github.com) | 00:10 |
| CarlFK | but I wouldn't bother if you have never used ansible before. unless you want to spend a few 4,8,12?) hours futzing | 00:11 |
| sam_ | never used ansible | 00:12 |
| mithro | sam_: I assume you just plug in the Opsis you got straight from crowd supply? You didn't install anything or get it second hand, right? | 00:14 |
| sam_ | correct | 00:14 |
| sam_ | just powered it up and tried opening the terminal | 00:14 |
| sam_ | two different units | 00:15 |
| sam_ | same results | 00:15 |
| sam_ | one I loaded the stable firmware from the prebuilt repo and it does the same thing | 00:15 |
| sam_ | tried multiple machines and same thing | 00:15 |
| sam_ | seems extremely odd.. no a stranger to using a terminal connection over serial | 00:16 |
| CarlFK | well.. we all have less than ideal experiences with this | 00:19 |
| sam_ | how could there be multiple connection to /dev/ttyACM0 open? | 00:22 |
| sam_ | something else on the board does? | 00:22 |
| sam_ | I certainly just have the one connection open | 00:22 |
| CarlFK | tumbleweed: what how does the usb stick install get the preseed file? | 00:22 |
| tumbleweed | it'd be on the USB stick | 00:23 |
| tumbleweed | there's a document describing how it's created IIRC | 00:23 |
| tumbleweed | (of course, this may not have been tested, yet) | 00:23 |
| mithro | sam_: What do you mean by "loaded the stable firmware from the prebuilt repo"? | 00:24 |
| sam_ | this firmware: https://github.com/timvideos/HDMI2USB-firmware-prebuilt/blob/master/opsis/firmware/stable | 00:26 |
| tpb | Title: HDMI2USB-firmware-prebuilt/stable at master · timvideos/HDMI2USB-firmware-prebuilt · GitHub (at github.com) | 00:26 |
| mithro | sam_: How did you load that? | 00:27 |
| sam_ | after much pain through HDMI-mode-switch | 00:27 |
| *** E__ has joined #timvideos | 00:27 | |
| *** Elldawg has joined #timvideos | 00:28 | |
| CarlFK | tumbleweed: URL? or something for me to go searching for? | 00:28 |
| *** Elldawg_ has joined #timvideos | 00:29 | |
| Elldawg_ | Ok I'm in | 00:29 |
| CarlFK | tumbleweed: I am 1/2 thinkink of making some sort of live environment so we can have an easy consistent test | 00:29 |
| Elldawg_ | I have the serial problem also | 00:30 |
| CarlFK | Elldawg hey there | 00:30 |
| Elldawg_ | Tried two different computers | 00:30 |
| Elldawg_ | Linux and Windows | 00:30 |
| Elldawg_ | It seems like something has the port open on the board | 00:30 |
| Elldawg_ | Receiving approximately half of the characters | 00:30 |
| Elldawg_ | But sending is fine | 00:30 |
| mithro | sam_ != Elldawg_ ? | 00:31 |
| Elldawg_ | No we working on same project | 00:31 |
| mithro | Ahh okay | 00:31 |
| Elldawg_ | I am just using whatever firmware came on the opsis from numato | 00:32 |
| *** Elldawg has quit IRC | 00:32 | |
| *** E__ has quit IRC | 00:32 | |
| Elldawg_ | I quit? | 00:33 |
| Elldawg_ | Oh weird | 00:33 |
| mithro | I don't think I have tried modeswitch flashing with firmware as old as v0.0.0 | 00:33 |
| CarlFK | mithro: has the serial console changed any? | 00:34 |
| mithro | Can you try https://github.com/timvideos/HDMI2USB-firmware-prebuilt/tree/master/archive/master/v0.0.2-81-gd0d3aea/opsis/hdmi2usb and https://github.com/timvideos/HDMI2USB-firmware-prebuilt/tree/master/archive/master/v0.0.3-687-gcba56bb/opsis/hdmi2usb/lm32 ? | 00:34 |
| tpb | Title: HDMI2USB-firmware-prebuilt/archive/master/v0.0.2-81-gd0d3aea/opsis/hdmi2usb at master · timvideos/HDMI2USB-firmware-prebuilt · GitHub (at github.com) | 00:34 |
| Elldawg_ | Yes I'll try | 00:35 |
| mithro | Elldawg_ / sam_: When did you get your boards? Can you also give me the output of lsusb for the board? | 00:35 |
| Elldawg_ | Couple weeks ago for both of us | 00:36 |
| Elldawg_ | Yes will do | 00:36 |
| mithro | Elldawg_ / sam_: What is your use case for these boards, BTW? | 00:38 |
| Elldawg_ | Nothing yet, they don't work lol | 00:39 |
| mithro | Elldawg_, I assume you purchased them for a reason? | 00:39 |
| Elldawg_ | But hopefully to capture hdmi and output stream over Ethernet | 00:39 |
| mithro | Elldawg_: At the moment we don't have any firmware which streams video via the Ethernet directly on the Opsis board | 00:40 |
| Elldawg_ | Or capture display port and output Ethernet | 00:41 |
| Elldawg_ | Or USB | 00:42 |
| Elldawg_ | Anything really | 00:42 |
| mithro | Most of our setup use Opsis->USB->Ethernet | 00:42 |
| Elldawg_ | Interesting | 00:42 |
| mithro | Elldawg_: We use a software video mixer called voctomix | 00:42 |
| Elldawg_ | I was thinking x264 rtsp stream or similar | 00:43 |
| Elldawg_ | But USB ok to start with | 00:43 |
| Elldawg_ | I'll go check the lspci | 00:43 |
| mithro | Elldawg_: Which lets us combined a bunch of different video sources, one which is from the HDMI2USB/Opsis boards | 00:43 |
| mithro | Elldawg_: lsusb | 00:43 |
| mithro | Elldawg_: but after the dmesg output | 00:43 |
| Elldawg_ | K | 00:43 |
| mithro | Elldawg_: The way the Opsis board enumerates as one device and then switches to another is an important part of debugging where the problem is | 00:44 |
| *** Elldawg_on_PC has joined #timvideos | 00:46 | |
| Elldawg_on_PC | OK i'm back | 00:47 |
| Elldawg_on_PC | was on my phone before | 00:47 |
| *** Elldawg_ has left #timvideos | 00:47 | |
| mithro | I would suggest using a decent IRC client like xchat or irccloud | 00:47 |
| Elldawg_on_PC | Bus 001 Device 002: ID 2a19:5442 | 00:48 |
| Elldawg_on_PC | bcdUSB 2.00 | 00:51 |
| Elldawg_on_PC | bDeviceClass 239 Miscellaneous Device | 00:51 |
| Elldawg_on_PC | bDeviceSubClass 2 | 00:51 |
| Elldawg_on_PC | bDeviceProtocol 1 | 00:51 |
| Elldawg_on_PC | (Interface Association) | 00:51 |
| Elldawg_on_PC | bMaxPacketSize0 64 | 00:51 |
| mithro | Elldawg_on_PC: http://paste.debian.net/ | 00:51 |
| tpb | Title: Debian Pastezone (at paste.debian.net) | 00:51 |
| Elldawg_on_PC | serial ffffd88039679ec3 | 00:51 |
| Elldawg_on_PC | ok hang on | 00:54 |
| Elldawg_on_PC | http://paste.debian.net/924858/ | 00:59 |
| tpb | Title: debian Pastezone (at paste.debian.net) | 00:59 |
| mithro | Elldawg_on_PC: and the dmesg output? | 00:59 |
| Elldawg_on_PC | after which part again? | 01:01 |
| Elldawg_on_PC | or you want the whole thing | 01:01 |
| mithro | Elldawg_on_PC: Whole thing is easier | 01:01 |
| Elldawg_on_PC | ok | 01:01 |
| Elldawg_on_PC | [ 1.873008] usb 1-1: config 1 interface 2 altsetting 0 endpoint 0x81 has an invalid bInterval 64, changing to 10 [ 1.888655] usb 1-1: New USB device found, idVendor=2a19, idProduct=5442 [ 1.888658] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.888659] usb 1-1: Product: HDMI2USB.tv - Numato Opsis Board [ 1.888660] usb 1-1: Manufacturer: TimVideos.us | 01:01 |
| Elldawg_on_PC | http://paste.debian.net/924859/ | 01:02 |
| tpb | Title: debian Pastezone (at paste.debian.net) | 01:02 |
| mithro | Elldawg_on_PC: your running in a VM? | 01:03 |
| Elldawg_on_PC | yes | 01:03 |
| Elldawg_on_PC | but it makes no difference | 01:03 |
| Elldawg_on_PC | tried my ubnutu laptop | 01:03 |
| mithro | Elldawg_on_PC: With both Windows and Linux? | 01:03 |
| Elldawg_on_PC | and windows desktop as well | 01:03 |
| Elldawg_on_PC | yep | 01:03 |
| Elldawg_on_PC | but also tried in native ubunutu on laptop | 01:04 |
| Elldawg_on_PC | same missing characters issue | 01:04 |
| mithro | Elldawg_on_PC: Do you have that native ubuntu laptop there? | 01:04 |
| Elldawg_on_PC | its at my office but i could go grab it | 01:04 |
| Elldawg_on_PC | have native windows box | 01:04 |
| Elldawg_on_PC | what was that terminal you guys recommended again? | 01:05 |
| CarlFK | Elldawg_on_PC: flterm and I like minicom | 01:06 |
| mithro | Elldawg_on_PC: I wouldn't be surprised to see dropped serial characters with a VM, there isn't any flow control and the high latency that a VM would add could easily cause drops | 01:06 |
| Elldawg_on_PC | right but same in windows terminal as well | 01:06 |
| Elldawg_on_PC | i'll go get the laptop | 01:06 |
| Elldawg_on_PC | actually screw it i'll bring the opsis to my office | 01:07 |
| Elldawg_on_PC | back in a few | 01:07 |
| mithro | Elldawg_on_PC: Yeah -- I would like to try a Ubuntu native Linux laptop first if possible | 01:07 |
| Elldawg_on_PC | will you guys be around in 45-60 minutes? | 01:08 |
| Elldawg_on_PC | gotta take my kid somewhere for a bit before going to grab laptop | 01:08 |
| mithro | Elldawg_on_PC: I will likely be unless I get called into a meeting | 01:08 |
| Elldawg_on_PC | ok thank you | 01:08 |
| Elldawg_on_PC | i appreciate you guys helping out | 01:09 |
| CarlFK | Elldawg_on_PC: im off to dinner, should be back in a few hours | 01:09 |
| Elldawg_on_PC | ok sounds good | 01:09 |
| Elldawg_on_PC | talk to you in a bit | 01:09 |
| mithro | Elldawg_on_PC: No problems! | 01:09 |
| mithro | Elldawg_on_PC: Want to get to the bottom of this | 01:09 |
| CarlFK | do you have a raspberry pi or odroid-c2 or any other Single Board Computer handy? | 01:09 |
| CarlFK | im trying to work out how you can have a similar environment - it is a little easier to dl/flash a 4g sd card than install ubuntu to a laptop | 01:11 |
| mithro | I'm heading to lunch - will be back in 15-30 minutes | 01:27 |
| *** thaytan has quit IRC | 02:35 | |
| *** thaytan has joined #timvideos | 03:15 | |
| *** ChanServ sets mode: +v thaytan | 03:15 | |
| Elldawg_on_PC | ok sorry back so late | 03:30 |
| Elldawg_on_PC | yes i have a raspberry pi | 03:30 |
| Elldawg_on_PC | hooking it up now | 03:30 |
| CarlFK | what distro do you have on it? | 03:31 |
| CarlFK | I am not exactly sure what I have | 03:31 |
| Elldawg_on_PC | raspian | 03:31 |
| *** sb0 has quit IRC | 03:31 | |
| *** sb0 has joined #timvideos | 03:33 | |
| CarlFK | what ver? I have 2016-05-27-raspbian-jessie.img | 03:33 |
| Elldawg_on_PC | 2017-01-11 | 03:34 |
| CarlFK | k - let me get that | 03:34 |
| Elldawg_on_PC | ok its working on the raspberry pi | 03:36 |
| Elldawg_on_PC | sweet | 03:36 |
| Elldawg_on_PC | so weird | 03:36 |
| *** rohitksingh_work has joined #timvideos | 03:45 | |
| CarlFK | yay! | 03:53 |
| CarlFK | btw - i just got 2017-03-02-raspbian-jessie-lite.zip | 03:53 |
| CarlFK | but.. now we know the Opsis is working as expected, so now to figure out what is messing things up | 03:54 |
| CarlFK | you can connect to it multiple tiimes. but that just lets you send chars, where the return chars go is a mystery | 03:55 |
| CarlFK | so my guess is something (Modem Manager) is connecting and trying to reset it using ATZ commands | 03:56 |
| mithro | Elldawg_on_PC: BTW if you say my name it get a notification | 03:58 |
| mithro | Elldawg_on_PC: I would be very interested to see if you have the same issue on the latest firmware | 04:04 |
| mithro | Elldawg_on_PC: I would be surprised if you didn't -- but it would be worth checking | 04:04 |
| mithro | Elldawg_on_PC / sam_: BTW How did you find out about the project / decide to purchase the Opsis board? | 04:05 |
| mithro | Elldawg_on_PC: btw - you didn't happen to install hdmi2usbd / HDMI2USB-controlproxy-daemon at all? | 04:06 |
| *** SamSagaZ has joined #timvideos | 04:17 | |
| *** SamSagaZ_ has quit IRC | 04:17 | |
| *** SamSagaZ_ has joined #timvideos | 04:31 | |
| *** SamSagaZ has quit IRC | 04:32 | |
| Elldawg_on_PC | i have not installed HDMI2USB-controlproxy-daemon but i think sam might have | 04:47 |
| CarlFK | that is likely what is eating the chars | 04:51 |
| *** Elldawg_on_PC has quit IRC | 04:57 | |
| *** arcticShadow has quit IRC | 05:15 | |
| *** froztbyt1 has joined #timvideos | 05:16 | |
| *** froztbyte has quit IRC | 05:16 | |
| *** arcticShadow has joined #timvideos | 06:16 | |
| *** froztbyt1 is now known as froztbyte | 07:21 | |
| *** dtornabene has joined #timvideos | 07:44 | |
| *** ishan_bansal has joined #timvideos | 08:29 | |
| *** arcticShadow has quit IRC | 09:21 | |
| mithro | ishan_bansal: ping? | 10:13 |
| ishan_bansal | Pong @mithro | 10:13 |
| mithro | ishan_bansal: You need to squash your commits together | 10:14 |
| mithro | ishan_bansal: Then use "git push --force" to update the pull request | 10:14 |
| ishan_bansal | Oh ok. I will. I was just figuring out what went wrong. | 10:15 |
| ishan_bansal | @Mithro. I have done the change :) | 10:22 |
| ishan_bansal | Ping @Mithro | 10:40 |
| ishan_bansal | scripts/download-env.sh: line 268: cd: /home/travis/build/timvideos/HDMI2USB-litex-firmware/third_party/litex: No such file or directory. This is the error that the repo is facing | 10:41 |
| mithro | ishan_bansal: https://github.com/timvideos/HDMI2USB-litex-firmware/pull/315/files | 10:43 |
| tpb | Title: Fix cloning edid-decode behind a proxy by ishan98 · Pull Request #315 · timvideos/HDMI2USB-litex-firmware · GitHub (at github.com) | 10:43 |
| mithro | ishan_bansal: You deleted the submodule | 10:43 |
| ishan_bansal | Ah! Iam sorry. I dint notice | 10:44 |
| ishan_bansal | Iam using Git after a long time. Please bare with me.:( | 10:45 |
| ishan_bansal | @Mithro Fixed it ) | 11:11 |
| mithro | ishan_bansal: you don't need to send a new pull request each time | 11:11 |
| mithro | ishan_bansal: Just update the change in your branch | 11:12 |
| ishan_bansal | Yess !! I was not able to sync my branch's missing folder with master. So, I made one | 11:12 |
| ishan_bansal | when i fetch with the upstream .... It shows its upto date :/ | 11:13 |
| *** danielki has joined #timvideos | 11:18 | |
| ishan_bansal | Once u get done with that PR. i ll discuss couple small problems with the setup. | 11:20 |
| *** ishan_bansal has quit IRC | 11:24 | |
| *** rohitksingh_wor1 has joined #timvideos | 11:30 | |
| *** rohitksingh_work has quit IRC | 11:31 | |
| *** rohitksingh_work has joined #timvideos | 11:34 | |
| *** rohitksingh_wor1 has quit IRC | 11:35 | |
| *** rohitksingh_wor1 has joined #timvideos | 11:40 | |
| *** rohitksingh_work has quit IRC | 11:42 | |
| *** rohitksingh_wor1 has quit IRC | 11:52 | |
| *** dtornabene has quit IRC | 12:35 | |
| *** danielki has quit IRC | 14:13 | |
| *** SamSagaZ__ has joined #timvideos | 18:49 | |
| *** SamSagaZ_ has quit IRC | 18:52 | |
| *** arcticShadow has joined #timvideos | 19:33 | |
| *** SamSagaZ__ has quit IRC | 20:39 | |
| *** arcticShadow has joined #timvideos | 20:43 | |
| *** arcticShadow1 has joined #timvideos | 22:12 | |
| *** arcticShadow has quit IRC | 22:12 | |
| *** springermac_ has joined #timvideos | 22:55 | |
| *** springermac is now known as Guest42199 | 22:55 | |
| *** springermac_ is now known as springermac | 22:56 | |
| *** Guest42199 has quit IRC | 22:56 | |
| *** arcticShadow1 has quit IRC | 23:12 | |
| *** SamSagaZ__ has joined #timvideos | 23:22 | |
| *** arcticShadow has joined #timvideos | 23:36 | |
| *** SamSagaZ__ has quit IRC | 23:58 | |
Generated by irclog2html.py 2.13.1 by Marius Gedminas - find it at mg.pov.lt!