| *** tpb has joined #timvideos | 00:00 | |
| rohitksingh1 | mithro: ping | 00:06 |
|---|---|---|
| rohitksingh1 | Joelw: ping | 00:06 |
| mithro | rohitksingh1: pong | 00:08 |
| mithro | shenki: ping? | 00:08 |
| Joelw | HI! | 00:09 |
| rohitksingh1 | mithro & Joelw: Hi! Before going to sleep, I'd like to discuss 1 thing. Every pin of Atlys's VHDCI connector has 50ohms resistor in series already present. So, do I necessarily need to add one more 51ohms resistor for every digital output from AD9984A. The datasheet says to add a resistor of 50-200ohms on digital outputs to reduce reflections. But, I see every VHDCI pin already has one, as per schematic. Any Comments? | 00:11 |
| Joelw | No, you shouldn't need to include additional resistors - the one on the Atlys will be fine. | 00:12 |
| rohitksingh1 | Joelw: Thanks for that. Thats a *huge* relief. The current design uses a 0402 (yes you saw correct :-o o.O ) footprint resistor network. And, it is a *huge pain* to solder it. Every time I solder them, 3-4 pins are left unconnected! Even the current PCB I'm working on has 3 signals unconnected (but thats not major issue right now since they are RGB signals. Only color distortion) | 00:17 |
| rohitksingh1 | Joelw: Again, A BIG thanks! :) | 00:17 |
| Joelw | No worries! :) | 00:18 |
| *** rohitksingh1 has left #timvideos | 00:28 | |
| mithro | aps-sids: you probably want to set the dvswitchsrc element too | 00:29 |
| shenki | mithro: pong pong pong | 00:49 |
| mithro | shenki: I'm going to head to the airport in about 15-20 minutes, my flight is at 1:10pm and I get in at 3pm ish | 00:51 |
| mithro | shenki: my plan is to get a taxi to my parents place, unpack and stuff | 00:51 |
| mithro | shenki: what you up to tonight? | 00:51 |
| shenki | mithro: not sure about tonight. might be heading to a wine bar with some friends. you're welcome to join us | 00:55 |
| shenki | mithro: but plans are very fluid | 00:55 |
| shenki | mithro: so i'll let you know | 00:55 |
| mithro | okay | 00:56 |
| shenki | mithro: would you like a ride from the airport? | 00:56 |
| mithro | shenki: I'd be happy to have one, but also happy to catch a taxi | 00:57 |
| shenki | mithro: cool. will see you at the airport :) | 01:07 |
| mithro | shenki: okay then | 01:07 |
| mithro | I might have a little luggage | 01:08 |
| mithro | so have to pick that up | 01:08 |
| shenki | okay | 01:08 |
| mithro | they also said possibility of delays from high speed winds | 01:08 |
| shenki | i'll keep an eye on the arrival times then | 01:08 |
| mithro | okay, heading out now | 01:13 |
| mithro | wil be back when at the airport | 01:13 |
| shenki | okay | 01:22 |
| mithro | Flight boarding now. | 02:35 |
| shenki | have a safe flight! | 02:38 |
| mithro | I'm allowed to use my phone until the doors close. | 02:43 |
| mithro | Free exit row upgrade! | 02:44 |
| mithro | shenki: http://andrew.yurisich.com/work/2014/07/12/github-reviews-use-your-editor/ | 02:57 |
| tpb | Title: Use your Editor for Pull Request Reviews · Andrew Yurisich (at andrew.yurisich.com) | 02:57 |
| shenki | mithro: nice | 02:58 |
| shenki | mithro: i also saw that github has a tool that wraps git, so you can use git am to apply pull requests | 02:59 |
| mithro | Actually, that doesn't actually describe how | 02:59 |
| shenki | https://hub.github.com/ | 02:59 |
| tpb | Title: hub · the command-line wrapper for git (at hub.github.com) | 02:59 |
| shenki | horrible name; hard to discover | 02:59 |
| mithro | You can actually get the pull requests as branches in your repo | 02:59 |
| shenki | mithro: is your flight on time? | 03:00 |
| mithro | It suppose to leave in 10 minutes but they haven't closed the doors yet | 03:01 |
| shenki | k | 03:01 |
| shenki | im about to go into town | 03:01 |
| shenki | if you highligt my nick when the doors close, i will get a push message on my phone | 03:01 |
| *** Niharika has joined #timvideos | 03:02 | |
| mithro | I'll try | 03:03 |
| mithro | Bug they will probably make me turn off the phone. | 03:03 |
| mithro | shenki: doors closing | 03:04 |
| *** Niharika has quit IRC | 03:36 | |
| *** Niharika has joined #timvideos | 03:40 | |
| *** Niharika has quit IRC | 04:08 | |
| *** Niharika has joined #timvideos | 04:21 | |
| *** Niharika has quit IRC | 04:36 | |
| *** tija has joined #timvideos | 04:37 | |
| *** tija has quit IRC | 05:31 | |
| aps-sids | mithro: CarlFK : I just tested with Carl's dvsmon (I had to port dvsource-v4l2-other as well) and this is what I see. -- http://i.imgur.com/4OcKcwF.png | 05:37 |
| mithro | aps-sids: that is using the dvswitchsink rather than the dvswitchsrc that the flumotion/streaming system does. | 05:40 |
| mithro | CARAM_: heyo. Started to follow your instructions for testing dockerized flumotion. Can you update them for docker 1.0 and your new push/config system? | 05:41 |
| CarlFK | aps-sids: looks good | 06:24 |
| aps-sids | CarlFK: how to test dvswitchsrc? | 06:25 |
| CarlFK | umm what is dvswitchsrc ? | 06:25 |
| aps-sids | nevermind | 06:27 |
| aps-sids | I'm trying to test with flumotion | 06:27 |
| CarlFK | neat | 06:27 |
| *** slomo has joined #timvideos | 06:54 | |
| *** slomo has joined #timvideos | 06:54 | |
| *** slomo has quit IRC | 07:26 | |
| aps-sids | mithro: can you please suggest the simplest way to test dvswitchsrc? | 07:37 |
| mithro | aps-sids: fire up dvswitch/grab stuff | 07:38 |
| mithro | aps-sids: use dvswitchsrc and ximagesink to display the output of dvswitch in another window | 07:38 |
| aps-sids | mithro: okay. So I launch a dvswitch, feed a dv video from a file using dvsource-file | 07:56 |
| aps-sids | and then "gst-launch-1.0 -v dvswitchsrc hostname=127.0.0.1 port=5000 ! dvdemux ! dvdec ! autovideosink" | 07:56 |
| aps-sids | and I see video both in dvswitch ui and the gst-launch window | 07:56 |
| aps-sids | mithro: Now I need your help with fixing the dpkg build issue | 08:03 |
| mithro | aps-sids: great! | 08:03 |
| mithro | aps-sids: sure where are you stuck? | 08:13 |
| mithro | shenki: this is what I was thinking of https://help.github.com/articles/checking-out-pull-requests-locally | 08:14 |
| tpb | Title: Checking out pull requests locally · GitHub Help (at help.github.com) | 08:14 |
| aps-sids | mithro: I think there's a problem with debian rules file. or maybe we need to change that but I haven't. | 08:15 |
| aps-sids | https://www.irccloud.com/pastebin/gTA7lwm8 | 08:15 |
| tpb | Title: Pastebin: gTA7lwm8 | IRCCloud (at www.irccloud.com) | 08:15 |
| shenki | aps-sids: hey | 08:26 |
| shenki | aps-sids: where's the deb? | 08:26 |
| shenki | and/or sources | 08:26 |
| aps-sids | shenki: just a sec, I need to push the code | 08:27 |
| aps-sids | shenki: here's the repo https://github.com/aps-sids/gst-plugins-dvswitch | 08:29 |
| tpb | Title: aps-sids/gst-plugins-dvswitch · GitHub (at github.com) | 08:29 |
| shenki | ah, it includes the debian packaging stuff | 08:31 |
| aps-sids | shenki: yeah, and that needs to be updates. I did some changes ( see latest commit ) | 08:33 |
| aps-sids | s/updates/updated | 08:33 |
| shenki | aps-sids: what command line where you using to build? | 08:41 |
| aps-sids | shenki: dpkg-buildpackage -b | 08:41 |
| shenki | k, thanks | 08:42 |
| shenki | aps-sids: it builds and installs on my machine without issue... | 08:43 |
| shenki | aps-sids: what was the problem you were seeing? | 08:43 |
| shenki | what distro are you using? version? architecture? | 08:43 |
| aps-sids | https://www.irccloud.com/pastebin/gTA7lwm8 | 08:43 |
| tpb | Title: Pastebin: gTA7lwm8 | IRCCloud (at www.irccloud.com) | 08:43 |
| aps-sids | Ubuntu 12.04 precise | 08:43 |
| aps-sids | amd64 | 08:43 |
| shenki | hrm | 08:44 |
| aps-sids | in a VM | 08:44 |
| shenki | im using 14.04 | 08:44 |
| aps-sids | make install works for me | 08:44 |
| shenki | aps-sids: did you run ./autogen.sh before building? | 08:44 |
| *** slomo has joined #timvideos | 08:45 | |
| aps-sids | shenki: no, I think its run automatically by dpkg. no? | 08:45 |
| shenki | aps-sids: yeah, should be. just trying to work out what i may have done differently | 08:45 |
| shenki | but i just did it from a clean git clone | 08:45 |
| shenki | so it wasn't that | 08:46 |
| shenki | i'll boot a vm | 08:46 |
| aps-sids | shenki: I earlier had 0.10 version of this package. (I removed it though) That might be a problem. | 08:47 |
| shenki | aps-sids: perhaps | 08:47 |
| aps-sids | I'm deleting and getting a clean repo to try again | 08:48 |
| aps-sids | same error | 08:49 |
| shenki | aps-sids: where did /usr/lib/libgstreamer-1.0.so.0 come from/ | 08:50 |
| shenki | ? | 08:50 |
| shenki | i have /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so | 08:51 |
| shenki | and /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0.204.0 | 08:51 |
| shenki | but not /usr/lib/libgstreamer-1.0.so.0 | 08:51 |
| shenki | i wonder if that's a leftover from a previous `make install` job? | 08:52 |
| shenki | (3 mins until the 12.04 ISO finishes downloading) | 08:52 |
| *** slomo has quit IRC | 08:53 | |
| *** slomo has joined #timvideos | 08:54 | |
| aps-sids | shenki: there was this problem that with make install , file was being installed in /usr/lib/gstreamer-1.0 by default. I had to add this prefix here to fix the make install -- https://github.com/aps-sids/gst-plugins-dvswitch/blob/master/autogen.sh#L11 | 08:54 |
| tpb | Title: gst-plugins-dvswitch/autogen.sh at master · aps-sids/gst-plugins-dvswitch · GitHub (at github.com) | 08:54 |
| shenki | yeah, i saw that | 09:37 |
| mithro | aps-sids: yeah - I'm pretty sure that isn't the correct fix | 09:45 |
| shenki | no, we shoudln't hardcode that path | 09:46 |
| mithro | aps-sids: did gstreamer install to the right path with make install, is it just the package which is wrong? | 09:53 |
| aps-sids | aps-sids: gstreamer looks for package in /usr/lib/x86_64-linux-gnu/gstreamer-1.0/ but it is installed in /usr/lib/gstreamer-1.0/ | 09:59 |
| aps-sids | I did that change for my system only | 09:59 |
| aps-sids | had to push code for showing | 09:59 |
| shenki | aps-sids: can you run $ dpkg -S /usr/lib/libgstreamer-1.0.so.0 | 10:01 |
| aps-sids | shenki: no path found matching pattern | 10:08 |
| shenki | aps-sids: okay, so that file comes from your 'make install' | 10:08 |
| shenki | this is the reason we never run 'make install' as root :) | 10:09 |
| aps-sids | oh | 10:09 |
| shenki | aps-sids: $ ls -la /usr/lib/libgstreamer-1.0.so.0 | 10:09 |
| aps-sids | shenki: lrwxrwxrwx 1 root root 27 May 2 23:59 /usr/lib/libgstreamer-1.0.so.0 -> libgstreamer-1.0.so.0.103.0 | 10:09 |
| shenki | aps-sids: hrm, you could try removing /usr/lib/libgstreamer* | 10:10 |
| shenki | it's a slippery slope though; it could leave your gstreamer install in a broken state | 10:11 |
| shenki | the up side is that the packaging is fine | 10:11 |
| shenki | the downside is your system is a little broken :) | 10:11 |
| aps-sids | shenki: there are 3 files in /usr/lib/ libgstreamer-1.0.so, libgstreamer-1.0.so.0, libgstreamer-1.0.so.0.103 | 10:11 |
| aps-sids | shenki: should I remove all three? | 10:11 |
| shenki | aps-sids: yes | 10:12 |
| aps-sids | shenki: libgstreamer-1.0.la too? | 10:13 |
| mithro | DEB_CONFIGURE_EXTRA_FLAGS += \ | 10:14 |
| mithro | --libdir=\$${prefix}/lib/$(DEB_HOST_MULTIARCH) \ | 10:14 |
| aps-sids | shenki: I removed the files | 10:15 |
| aps-sids | mithro: where does $(DEB_HOST_MULTIARCH) value come from? | 10:16 |
| mithro | aps-sids: not quite sure :P | 10:16 |
| mithro | # this is for compatibility with dpkg-dev < 1.13.5, see | 10:16 |
| mithro | # <http://lists.debian.org/debian-devel-announce/2005/06/msg00010.html> | 10:16 |
| mithro | DEB_HOST_ARCH_CPU := $(shell dpkg-architecture -qDEB_HOST_ARCH_CPU 2>/dev/null) | 10:16 |
| mithro | DEB_HOST_ARCH_OS := $(shell dpkg-architecture -qDEB_HOST_ARCH_OS 2>/dev/null) | 10:16 |
| tpb | Title: Bits from the dpkg maintainer (at lists.debian.org) | 10:16 |
| mithro | I'm looking at the debian/rules file from gst-plugins-bad1.0-1.2.4 | 10:17 |
| aps-sids | okay | 10:17 |
| mithro | aps-sids: https://github.com/aps-sids/gst-plugins-dvswitch/pull/1 | 10:31 |
| tpb | Title: Changing the way debian package works (to use cdbs). by mithro · Pull Request #1 · aps-sids/gst-plugins-dvswitch · GitHub (at github.com) | 10:31 |
| aps-sids | mithro: Do I need to test it or simply merge? | 10:33 |
| mithro | aps-sids: you should test it | 10:34 |
| aps-sids | mithro: Do I need to install some package? | 11:12 |
| aps-sids | debian/rules:4: /usr/share/cdbs/1/rules/debhelper.mk: No such file or directory | 11:12 |
| aps-sids | debian/rules:5: /usr/share/cdbs/1/class/gnome.mk: No such file or directory | 11:12 |
| aps-sids | debian/rules:6: /usr/share/cdbs/1/rules/utils.mk: No such file or directory | 11:12 |
| *** shenki_ has joined #timvideos | 11:17 | |
| *** ChanServ sets mode: +v shenki_ | 11:17 | |
| aps-sids | mithro: okay, did sudo apt-get install cdbs | 11:17 |
| *** shenki has quit IRC | 11:19 | |
| aps-sids | mithro: I need to run same cmd right? | 11:21 |
| aps-sids | I'm getting same error -- | 11:21 |
| aps-sids | https://www.irccloud.com/pastebin/qjylMvfh | 11:21 |
| tpb | Title: Pastebin: qjylMvfh | IRCCloud (at www.irccloud.com) | 11:21 |
| mithro | aps-sids: hrm... | 11:31 |
| *** shenki_ has quit IRC | 11:36 | |
| *** shenki has joined #timvideos | 11:38 | |
| *** ChanServ sets mode: +v shenki | 11:38 | |
| *** shenki has quit IRC | 12:00 | |
| CarlFK | aps-sids: i finely chcked out my dvsmon/Vagrantfile - the install/provision didn't seem to have any problems (all .deb and such installed) but it did ask for a login, I have never seen that before. | 12:04 |
| * CarlFK goes back to sleep | 12:05 | |
| mithro | aps-sids: this is on ubuntu precise? | 12:16 |
| aps-sids | mithro: yes | 12:16 |
| mithro | aps-sids: I fixed the cdbs dependency issue | 12:18 |
| mithro | aps-sids: just setting up a precise machine I can test on | 12:19 |
| mithro | aps-sids: I built the stuff on trusty | 12:25 |
| mithro | aps-sids: did you get anywhere with twisted issue? | 12:25 |
| aps-sids | mithro: twisted issue looks like a good amount of work and I'm not very experienced with twisted right now. | 12:27 |
| mithro | aps-sids: did you find any instructions on the upgrade / replacement path? | 12:29 |
| aps-sids | mithro: not really. The core functionality of flumotion needs to be changed though. | 12:29 |
| mithro | aps-sids: really? How did the old function work? | 12:30 |
| aps-sids | mithro: flumotion uses some 'listenWith()' method that has been removed in twisted 13. We need to update that. I don't know about how much work will that be. I guess I need to start replacing it for knowing other problems. | 12:35 |
| mithro | aps-sids: could we just add pack the "listenWith()" method? or is there more complexity | 12:36 |
| aps-sids | mithro: no idea, sorry | 12:37 |
| mithro | aps-sids: no worries | 12:37 |
| aps-sids | mithro: I was looking at this but couldn't find much info. https://launchpad.net/ubuntu/+source/twisted/+changelog | 12:39 |
| tpb | Title: Change log : “twisted” package : Ubuntu (at launchpad.net) | 12:39 |
| aps-sids | mithro: I can probably get some more info but I'd need more time to inspect it. | 12:41 |
| mithro | aps-sids: yeah, it's something we'll need to figure out | 12:41 |
| aps-sids | mithro: btw about porting ugly components, I think I should install the flumotion being ported on system and then I can install and use the plugins. I can manage without flumotion-admin | 12:43 |
| aps-sids | mithro: CarlFK Should I send pull request for ported dvsource-v4l2-other and dvsmon? | 13:17 |
| mithro | aps-sids: for dvsource-v4l2-other does it still support both gstreamers? or just the new one? | 13:23 |
| aps-sids | mithro: Both gstreamers have names for elements, so no. | 13:24 |
| aps-sids | We can probably make it use the name depending on the gst version? | 13:24 |
| mithro | aps-sids: okay, we should have two branches? | 13:24 |
| aps-sids | mithro: yeah, that would be good ai guess | 13:25 |
| aps-sids | s/ai/I | 13:25 |
| mithro | aps-sids: or we could make the commands depend on the gst version found | 13:25 |
| mithro | aps-sids: but I think first lets just go with multiple branches | 13:25 |
| aps-sids | cool | 13:25 |
| aps-sids | mithro: and btw, your fixed pull request also didn't work. Did you get to test on precise? | 13:26 |
| mithro | aps-sids: no, as I said tested on trusty | 13:26 |
| mithro | aps-sids: btw you can see my aborted attempt to port dvsource to use pygst at https://github.com/timvideos/dvsource-v4l2-other/tree/pygst too | 13:27 |
| tpb | Title: timvideos/dvsource-v4l2-other at pygst · GitHub (at github.com) | 13:27 |
| mithro | actually, looks like there are multiple of branches | 13:27 |
| mithro | I should figure out what they are all for | 13:27 |
| aps-sids | mithro: pygst won't work with gstreamer-1.0 | 13:27 |
| mithro | aps-sids: yes, but you know how to port it :P | 13:28 |
| aps-sids | mithro: Actually, this already works with gstreamer 1.0 https://github.com/aps-sids/dvsource-v4l2-other/commit/120ca014b141ce1eba9dcaa0e20a30aedfbea82b | 13:31 |
| tpb | Title: Ported to Gstreamer-1.0 · 120ca01 · aps-sids/dvsource-v4l2-other · GitHub (at github.com) | 13:31 |
| mithro | aps-sids: but that works via running gst-launch which is kind of sucky from the point of view of monitoring the pipeline | 13:32 |
| aps-sids | mithro: okay. Does your pygst branch works? | 13:33 |
| mithro | aps-sids: probably not | 13:33 |
| aps-sids | :P | 13:33 |
| mithro | aps-sids: it's a low priority | 13:34 |
| aps-sids | mithro: So what should I do next. Port ugly flumotion components? | 13:34 |
| aps-sids | or something else | 13:34 |
| mithro | aps-sids: you got a timvideos streaming configuration booting? | 13:35 |
| aps-sids | no | 13:35 |
| aps-sids | mithro: in fact, that requires some of the ugly components? | 13:37 |
| mithro | aps-sids: I think so | 13:37 |
| mithro | aps-sids: your first goal should be get one of those streams up and running | 13:42 |
| *** shenki has joined #timvideos | 13:59 | |
| *** ChanServ sets mode: +v shenki | 13:59 | |
| *** Niharika has joined #timvideos | 14:10 | |
| *** slomo has quit IRC | 14:14 | |
| *** Niharika has quit IRC | 14:21 | |
| *** Palash has joined #timvideos | 14:39 | |
| *** Palash has quit IRC | 14:57 | |
| *** FeltonWork has joined #timvideos | 15:02 | |
| *** rohitksingh has joined #timvideos | 15:11 | |
| *** Palash has joined #timvideos | 15:16 | |
| *** Niharika has joined #timvideos | 15:22 | |
| *** Niharika1 has joined #timvideos | 16:18 | |
| *** Niharika has quit IRC | 16:19 | |
| CARAM_ | mithro: yeah sure | 16:39 |
| *** Niharika1 has left #timvideos | 17:23 | |
| CARAM_ | aps-sids: ping? | 18:18 |
| *** ldlework has quit IRC | 18:35 | |
| *** ldlework has joined #timvideos | 18:39 | |
| *** FeltonWork has quit IRC | 18:53 | |
| *** Palash has quit IRC | 18:54 | |
| CarlFK | I need crew for PyOhio in 7 days.. anyone interested ? | 19:20 |
| *** slomo has joined #timvideos | 19:41 | |
| *** slomo has joined #timvideos | 19:41 | |
| *** shenki has quit IRC | 19:55 | |
| *** shenki has joined #timvideos | 19:55 | |
| *** ChanServ sets mode: +v shenki | 19:55 | |
| *** mparuszewski has quit IRC | 20:32 | |
| *** rohitksingh has quit IRC | 21:00 | |
| *** rohitksingh has joined #timvideos | 21:01 | |
| *** slomo has quit IRC | 21:36 | |
| *** rohitksingh has quit IRC | 22:01 | |
| *** rohitksingh has joined #timvideos | 22:20 | |
| *** CarlFK has quit IRC | 23:36 | |
Generated by irclog2html.py 2.12.1 by Marius Gedminas - find it at mg.pov.lt!
