Tuesday, 2021-03-30

*** tpb has joined #symbiflow00:00
*** curtosis[away] has joined #symbiflow00:16
*** curtosis[away] has quit IRC00:31
*** Degi_ has joined #symbiflow01:21
*** Degi has quit IRC01:23
*** Degi_ is now known as Degi01:23
*** futarisIRCcloud has quit IRC01:48
-_whitenotifier-5- [prjxray] mithro opened issue #1639: AssertionError: Mapping file /tmpfs/src/github/symbiflow-prjxray-continuous-db-artix7/settings/artix7/resources.yaml does not exists - https://git.io/JY4l304:03
*** futarisIRCcloud has joined #symbiflow04:21
*** kgugala has joined #symbiflow04:39
*** Navadeep has joined #symbiflow05:04
*** Navadeep has quit IRC05:06
*** kraiskil has joined #symbiflow06:12
*** kraiskil has quit IRC06:48
*** cr1901_modern has quit IRC08:29
*** futarisIRCcloud has quit IRC10:10
*** proteusguy has joined #symbiflow12:22
*** cr1901_modern has joined #symbiflow14:45
mithroFYI There is a CHIPS Alliance workshop starting in 13 minutes at https://chipsalliance.org/workshops-meetings/14:47
mithro@acomodi: The new base Kokoro image has been created and hopefully will be used on https://github.com/SymbiFlow/symbiflow-arch-defs/pull/211216:07
sf-slack<krutideepan123> Hi everyone, I am Kruti Deepan Panda a 2nd year Electronics and Communication Student. I know verilog and have made a simple microprocessor based on a series of lectures by MIT's OCW. I would love to help out here. Is there any way I can contribute to this project.16:18
*** kgugala_ has joined #symbiflow17:12
*** kgugala has quit IRC17:15
*** kraiskil has joined #symbiflow17:23
*** kgugala_ has quit IRC17:23
*** kgugala has joined #symbiflow17:23
tcal@gatecat: holy @#%$@, it works!   LiteX on LIFCL-17 is alive with the latest nexpnr updates!17:25
gatecatYay!17:25
gatecatThat's very good news17:25
tcalIt certainly is17:25
gatecatThanks for your help testing!17:26
tcalI'm amazed how you can debug stuff without HW!   And jumping straight from blinky to LiteX :)17:28
tcal   I have it running at 75MHz (nextpnr meets timing with 88.5MHz given the right seed); it would be great if we could get it up to 112.5MHz (we have integer divisors of 450MHz).    I can start looking at critical paths and see if there's anything obvious that Yosys could be doing better for Nexus.17:30
gatecatOne thing to try is doing Yosys synthesis and Radiant PnR - there should be a LiteX option for this17:30
gatecatThis helps work out whether the timing problem is more on the Yosys or nextpnr side17:31
gatecatand yeah comparing critical paths between the flows would be interesting too17:31
tcal👍17:35
*** rj has joined #symbiflow17:37
sf-slack<pgielda> cool !17:48
*** curtosis[away] has joined #symbiflow18:04
*** curtosis[away] has quit IRC18:35
*** ror has joined #symbiflow19:26
*** ror has joined #symbiflow19:36
*** ror has quit IRC19:36
*** curtosis has joined #symbiflow20:01
*** kraiskil has quit IRC20:41
*** curtosis is now known as curtosis[away]21:22
*** curtosis[away] has quit IRC21:22
sf-slack<fdeweers> I'm trying to setup the open source toolchain for my zturn board (zynq 7020). I'm getting a uboot error however when I reset the board. `Type [C-a] [C-h] to see available commands`  `Terminal ready`  `���渝���`  `U-Boot SPL 2019.01-g3ccf78ee (Dec 17 2020 - 17:03:21 +0000)`  `mmc boot`  `Trying to boot from MMC1`  `MMC: no card present`  `spl: mmc init failed with error: -123`  `SPL: failed to boot from22:05
sf-slackall boot devices`  `### ERROR ### Please RESET the board ###` Am i doing something wrong or is this related to the uboot files from the setup guide?22:05
mithrogatecat / tcal: Massive congratulations!22:23
*** umarcor has quit IRC22:36
*** ZirconiumX has joined #symbiflow22:40
*** ZipCPU_ has joined #symbiflow22:41
*** jordigw has quit IRC22:41
*** jordigw has joined #symbiflow22:41
*** ZipCPU has quit IRC22:41
*** umarcor has joined #symbiflow22:43
*** Lofty has quit IRC22:43

Generated by irclog2html.py 2.17.2 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!